You have no items in your shopping cart.
12 Gauge Steel With 2" Door Slab With Solid Steel Scrollwork
5/8" Double Pane Insulated Tempered Glass For Safety
Top & Bottom Flush Bolts For Locking Stationary Door
Aerospace Grade Bullet Hinges Can Support 1500 lbs.
Heavy Duty Weather-Stripping For Air Tight Seals & Sound Insulation
Mounting Tabs or Nail Fin Welded To Frame For Easy Installation
Pre-Drilled Boreholes For Easy Installation of Handles & Locks
1 1/2" Welded Sloping Threshold Attached To Door Jamb
Double T-Astragal For Air Tight Sealing From The Outside
Example: 72 x 96" double door will include the frame/jamb in this measurement
Recommended rough opening to be at least 1" wider and 1/2" taller than the iron door to allow for adjustment during installation
6" jamb is standard for 2x4 walls. If you have 2x6 walls, you may want to consider a custom order with an 8" jamb or use trim
Please Consult With Your Contractor Or Builder Before Purchasing
Check out some of our Weslock entry sets below:
If ordering a double door, you will need an active and a dummy entry set
When purchasing a lock-set from a 3rd party such as Schlage, Baldwin, Weslock, Emtek, etc., please use the following measurements below:
Our measurements include the entire door & jamb. We measure our iron & steel doors from the outside of each part of the jamb/frame.
For example, a 38"x 96" single door will include the jamb in this measurement. We recommend a rough opening to be at least 1" wider and 1/2" taller than the iron door to allow for movement when installing the iron door.
Inswing means that the door opening is inside the house. Outswing doors open to the outside and are used mostly for patio doors or storefronts to meet building codes.
When facing the door from the outside of house, left hand inswing means the left door opens into the house.
When deciding between left and right inswing, this will depend on your house layout and is a preference to the customer on which direction they want the primary door to open.
We use a cold rolled solid steel profile imported from Switzerland to make the frame as thin as possible to allow for more light to enter the home.
Cold rolled steel frames allow us to create a contemporary and modern slim steel profile that provides uninterrupted sightlines between doors and windows.
Cold Rolled Steel is solid steel made without heating the steel which is more complex and expensive but allows for greater strength, precision, and accuracy when cut.
We use cold rolled steel to create the thinnest frames of our Light S Series doors to allow for slimmer contemporary architectural lines resulting in larger glass and more light entering the home than what we could achieve with iron tubing.
While more expensive, cold rolled steel is solid steel and built to last a lifetime where many of the historical building that have steel windows or doors use cold rolled steel.
Most of our cold rolled solid steel doors are custom and built to spec. We can make doors and windows in the following configurations:
We use 5/8" tempered insulated dual pane glass with glass already installed in our wrought iron doors. For custom exterior iron doors, we have over 10 different glass options.
Rain glass & Low E clear glass styles tends to be the most popular, but we also have aquatex, reed, frost, etc. If you find an in-stock steel door style you like but want a different glass style, we can create a custom iron door order.
Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass.
Tempering puts the outer surfaces into compression and the inner surfaces into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (aka: annealed glass) creates. The granular chunks are less likely to cause injury.
Our Light S Series cold rolled steel doors are pre-hung meaning the jamb, door, glass, flush bolt is included and already pre-installed.
Only handles, installation bolts and installation are not included to allow customers to choose their own lock and installer.
Our Light S Series doors are made from a solid cold rolled steel profile so they are very heavy.
A single 3' x 8' foot iron exterior door will weigh around 400 pounds with double doors weighing around 800-1000 pounds.
Yes, we can make any design, glass style, color, and size of steel doors.
We provide a CAD drawing before production and a deposit. Please note, due to high backlog, custom order can take anywhere from 16-22 weeks.
To order a custom door contact us at email@example.com or view our custom page below.
Yes, contractors, builders, developers, and other door companies often purchase our single & double iron entry doors and then sell to their own clients. You could be paying more at another iron door company and still be receiving one of our wrought iron entry doors.
To check out & apply to our builders program, click here.
No, we are a distributor of wrought iron doors & steel windows throughout North America but do not install iron security doors. However, our customers can easily install our pre-hung doors or find local contractors in their area for installation.
We have an easy step by step installation guide that will show you or your contractor how to install our wrought iron exterior doors.
It is recommended that you have at least 2 other people to help with the installation as our iron doors are very heavy.
We ship to all 48 states and shipping usually takes only 4-10 days for in-stock iron doors depending on location and carrier.
The carrier provided will call to schedule a delivery date and time to deliver your door. Note, the customer is responsible for unloading the door from the delivery truck.
For more info on the shipping process, please click the button below or contact us for any questions at firstname.lastname@example.org
Iron door shipping cost will depend based on location and the number of doors ordered. Multiple door orders, doors with transoms, or doors larger than 8' can have shipping cost estimated at the time of quote.
For Texas residents, we offer free local pickup from our Houston warehouse. We also offer local deliveries if less than 75 miles from our warehouse.
We provide a liftgate when possible. However, many of our steel security doors are too big to fit on a liftgate so you will need 2-3 people to dismantle the pallet and unload the doors once delivered.
Yes, we offer free local pickup from our warehouse in Houston, TX. We will load the door onto your truck free of charge.
Our iron doors are packaged in individual wooden crates and secured to a custom pallet to prevent damages made by shipping carriers.
Note, you will need 2-3 people to help dismantle the pallet once delivered curbside.
Our iron security doors are made from the highest quality 12 gauge steel so they are extremely heavy.
A 3' x 8' foot single iron door will weigh around 400 pounds with 6 x 8' double iron doors weighing around 800-1000 pounds.
All of our in-stock Light S Series cold rolled steel doors come with a 2" jamb.
We can make the jamb larger for custom orders if requested.
Jambs are included with all steel door purchases.
We use the same cold rolled steel profile as the door.
Because cold rolled steel is solid steel it can not be insulated. Light S Series cold rolled steel doors are not insulated.
Please contact us if you would like thermally broken cold rolled steel profile.
A steel threshold is included with all exterior iron door purchases and is already welded onto the jamb.
For modern interior steel doors, we can make custom orders with or without a threshold as this is standard for interior doors.
We make our Light S Series cold rolled steel door frames with nail fin or mounting tabs with pre-drilled holes for easy installation.
Once the jamb is level, just drill bolts into the mounted tabs or nail fin with pre-drilled holes.
Because there are many different handles and locks to choose from, we do not include handles and locks with in-stock iron & steel doors. However, these may be purchased from us separately. Our iron steel exterior & interior doors are compatible with most major lock-set brands and smart locks.
However, if you like the traditional iron pull handles that do not have latches, we can make those with a custom order.
All of our in-stock iron doors come with two pre-drilled bore holes, unless otherwise specified.
Locks will need to be installed after iron door installation to prevent damage during shipment. When purchasing a lock-set from a 3rd party such as Schlage, Baldwin, Weslock, Emtek, etc., please use the following measurements below:
Bore hole: 2 1/8"
Back set: 2 3/4"
Center to center: 5 1/2"
Door Thickness: 2"
Yes, we may be able to allow for faster production and shipping of our security doors. Please contact us directly for more info.
Yes, we can make any size of modern steel or wrought iron door in any style with custom glass and color finishes. We can even add a push bar as a handle.
If you would like to custom order a commercial iron or steel entry door, please email us at email@example.com